Tuesday, March 28, 2017

How To Enable LAN Port on PLDT Fibr Modem Po?

  1. Make sure you're connected to the network via wifi or LAN (use LAN Port #1).
  2. Open your browser and enter 192.168.1.1 in the address bar.

  1. Use username: adminpldt and password: 1234567890
Note: You might be asked to nominate a new password and wifi name, make sure you write it down for future reference.
  1. Click the Network tab then click the Broadband Settings on the left side navigation.
  2. Under Lan Binding, make sure to check the LAN 2, LAN 3 and LAN 4 check boxes.
  3. Click the Apply button in the buttom of the page to save the changes.
Posted by at
Labels: , , , ,

51 comments:

  1. UnknownAugust 4, 2017 at 5:37 AM

    Hi, this did not work for me, well.. it technically did, since the UN and PW wasn't that.. it was
    username: admin
    password: 1234
    for me. Anyway, my problem is, when I click the Network tab, There aren't any options to choose. Broadband settings and Lan Binding wasn't in the list. The only tab available was WLAN Settings. Can you assist me with this one?

    ReplyDelete
    Replies
    1. AuthorAugust 4, 2017 at 7:36 AM

      "admin" as username is not the administrator account of your router. That's why the options you can see are limited. What's the model of your wifi router?

      Delete
    2. kaiencrossAugust 19, 2017 at 7:31 PM

      help me too AN5506-04-FA cant enter the said password user just the limited function admin 1234 account

      Delete
    3. UnknownSeptember 11, 2017 at 10:41 PM

      @kaiencross
      Same problem with me, I can't find any broadband settings :( How to fix this?

      Delete
    4. UnknownSeptember 20, 2017 at 9:25 PM

      Hindi po gumagana yung username at password na naka indicate above. Heeeelp. :(

      Delete
    5. Unknown userDecember 11, 2017 at 5:50 PM

      step 1. log in
      username admin
      pass 1234
      step 2. Copy paste this to your browser
      "http://192.168.1.1/internet/wan_sfu.asp"
      step 3. in the LAN Binding, Check the boxes...
      LAN 2, LAN 3 AND LAN 4
      step 4. click "Apply" at the very bottom of the page

      hope this helps :)

      Delete
    6. UnknownDecember 19, 2017 at 8:09 PM

      Thanks Unknown user... gumana.. hehehe

      Delete
    7. UnknownJanuary 13, 2018 at 5:46 PM

      wow! Thanks! I don't know pero before I tried using the adminpldt account pero kahit naka check na yung settings ndi sya nag take effect..pero dito sa admin lang..then paste URL gumana sya. slamat!

      Delete
    8. UnknownMay 12, 2018 at 6:09 AM

      Access Error: Site or Page Not Found.. hindi nagana yung http://192.168.1.1/internet/wan_sfu.asp

      Delete
  2. UnknownSeptember 19, 2017 at 5:51 AM

    With a recent update to PLDT FIBR units, you need to disconnect the fibre connector (carefully and remember the direction of the plug), and reboot your router before you can access 192.168.1.1

    ReplyDelete
  3. UnknownOctober 7, 2017 at 1:54 AM

    help d gumana ung user and password

    ReplyDelete
  4. UnknownNovember 15, 2017 at 5:51 AM

    Sir try this depende po sa version.

    For Software version RP2611

    login your admin account

    once login right-click anywhere on the page then select "Inspect"

    go to "Sources" tab and find menu_pldt.asp then select, it is under loginPage(menu_pldt.asp)

    right click line number 29 to add breakpoint


    Reload the page

    then go to "Console" tab and type curUserType=2 then hit enter

    Last Step go to "Sources" tab and click play(resume)/pause button.

    For software 2608

    Login using 'admin' as your username and 1234 as your password (default).

    Right-click anywhere on the screen, then click 'Inspect'.

    Go to 'Sources' tab and click number 32 to add breakpoint.

    Reload the page.

    Go to 'Console' tab and type in curUsertype=2, then hit enter.

    Go to 'Sources' tab and click play(resume)/pause button.

    You will have access to 'adminpldt' account permissions.

    Sana may matulungan. :)

    ReplyDelete
    Replies
    1. UnknownNovember 16, 2017 at 4:44 AM

      SALAMAAAAAAAAAAAAAAAT!!!!

      Delete
    2. UnknownNovember 20, 2017 at 4:16 AM

      malaking tulong po sana ito, kaso hindi ako na route sa adminpldt account permissions :(( please help

      Delete
    3. UnknownMarch 28, 2018 at 4:54 AM

      how about for version RP2616? tnx

      Delete
    4. UnknownMay 27, 2018 at 8:51 AM

      Sir sa 2613 meron?

      Delete
    5. UnknownAugust 10, 2018 at 5:13 PM

      sir 2621 meron po?

      Delete
  5. UnknownDecember 16, 2017 at 10:06 PM

    https://gist.github.com/kbeflo/de3b1610b1879f8e92966ba106f83f97

    ReplyDelete
  6. UnknownJanuary 26, 2018 at 2:43 AM

    THHHHAAANNNNNKKKKKSSSSSS!

    ReplyDelete
  7. UnknownMarch 28, 2018 at 4:55 AM

    How about for Version RP2616? tnx

    ReplyDelete
  8. UnknownApril 6, 2018 at 12:07 AM

    Hello! I cant access full admin rights even though im logged-in as Administrator. The software version of our router is RP2647 Model AN5506-04-F. Any help po is appreciated.

    ReplyDelete
  9. UnknownApril 24, 2018 at 6:10 AM

    I can't still use my LAN 2. While my LAN 1 works.

    ReplyDelete
    Replies
    1. dridgeOctober 14, 2020 at 4:11 AM

      same here.all the LAN ports are enabled but only LAN 1 works

      Delete
  10. UnknownApril 24, 2018 at 11:17 PM

    me 2

    ReplyDelete
  11. UnknownMay 26, 2018 at 4:13 PM

    http://192.168.1.1/internet/wan_sfu.asp


    whooooo thanks...

    ReplyDelete
  12. UnknownMay 27, 2018 at 8:52 AM

    Sa 2613 sir anong line mag add ng breakpoint

    ReplyDelete
  13. UnknownJuly 10, 2018 at 11:15 PM

    may ganito rin ako kaso lang di pa activated yung connection kaya wala pa internet pwede ba yang gawain? kahit di pa activated?

    ReplyDelete
  14. UnknownJuly 18, 2018 at 9:36 PM

    do you have lates sites for the activation of lan 1 to lan 4 for pldt fibr

    ReplyDelete
  15. UnknownJuly 22, 2018 at 9:39 AM

    version RP2621 sir any solution?

    ReplyDelete
  16. UnknownAugust 21, 2018 at 6:35 AM

    sir RP2627

    ReplyDelete
  17. UnknownAugust 22, 2018 at 4:23 AM

    any update sir?

    ReplyDelete
  18. UnknownAugust 24, 2018 at 12:09 AM

    RP2658 sir may solution kayo?

    ReplyDelete
  19. pakitongAugust 24, 2018 at 5:05 PM

    The new unveil PLDT Fibr username password account :FiberhomeSuperAdmin" https://t.co/IIA7GmcfLo

    ReplyDelete
  20. Animeboy102January 21, 2019 at 6:54 AM

    good day sir.. enable ko na po..pero walang internet connection ung lan2 3 4.. :( sorry newbie po..

    ReplyDelete
  21. lesterFebruary 10, 2019 at 6:02 PM

    want to help din po sana para ma.enable po yong port lan 2,3,4 po.. version RP2658 po.. salmat po

    ReplyDelete
  22. RRRFebruary 15, 2019 at 12:34 AM

    Same here, Software Version RP2658 po. Sana matulungan ako para gumana yung ports 2, 3 and 4 ko. Thanks!

    ReplyDelete
  23. UnknownFebruary 26, 2019 at 6:13 AM

    how to enable port in software rp2613?

    ReplyDelete
  24. UnknownMarch 14, 2019 at 11:11 PM

    an5506-04-fa rp2627 na activate q na xa kahapon, nakapag internet naman aq ng smooth, ang problema after 24 hours, bali ngayon 2pm, ayaw na, ng breakpoint n aq wla pa din, like nung ginawa ko kahapon, still walang nagyari, no internet connection parin, ndi kaya ni reremote ni PLDC to? any suggestion para always may internet na xa sa lan 2? TIA

    ReplyDelete
    Replies
    1. UnknownJune 11, 2019 at 12:51 AM

      pano po process na ginawa nio same version po tyo ng modem

      Delete
  25. CliipyJune 5, 2019 at 5:05 AM

    Sir Need Help naman po Paano po sa Version RP2658 gusto ko po sana i enable yung Port 2 to 4 po .. Thank you!

    ReplyDelete
  26. CliipyJune 5, 2019 at 5:07 AM

    Need Help sir sa Version RP2658 i enable ko po sana Port 2 to Port 4 .. sana po matulungan nyo ko .. Thankyouu

    ReplyDelete
  27. UnknownJune 20, 2019 at 1:56 AM

    bakit lan 1 lng ang magamit sa pldt fibr

    ReplyDelete
  28. ecyorNovember 18, 2019 at 5:18 AM

    mga bossing
    meron ba tayong solution for RP2631, LAN1 lang ang active,

    Help please

    ReplyDelete
  29. UnknownMay 6, 2020 at 1:05 AM

    ayaw gumana sa akin .. RP2646 model no AN5506-04-FA

    ReplyDelete
  30. SteveMay 8, 2020 at 6:57 AM

    Mga boss patulong din. ayaw gumana din sakin. software Version: RP2602
    Device model: HG6245D
    Salamat sa makakapansin

    ReplyDelete
  31. UnknownJune 23, 2020 at 4:14 AM

    Putang inang PLDT to. bakit ang hirap paganahin ng LAN 2,3,4 niyo? ang daming kaartehan. hindi niyo na sana nilagyan ng LAN2,3,4 para hindi na umasa ang users na pwede multiple connections.

    ReplyDelete
  32. UnknownJuly 8, 2020 at 9:28 AM

    Bakit ngayon hindinna makita ang BNDING sa LAN para ma check sana (PLDT HOME FIBR)

    ReplyDelete
  33. UnknownMarch 11, 2021 at 2:19 AM

    Thanks

    ReplyDelete

Subscribe to: Post Comments (Atom)